Description
Round Face 41mm
Square Face 38mm
Head Width 97mm
Weight 0.425kg
Panel Beater Shrinking &
Flat Face Hammer
Flat Face Hammer
SYK056900V2
• Medium-weight
flat face shrinking hammer, specifically
designed for panel beating on slightly stretched
areas of metal
• Twin head with 1 round flat face
and 1 square, cross milled face
Ref 056900V2
designed for panel beating on slightly stretched
areas of metal
• Twin head with 1 round flat face
and 1 square, cross milled face
Ref 056900V2
Shrinking Hammers
Useful in the final stages of panel finishing when slightly
stretched areas of metal can be encountered.
Useful in the final stages of panel finishing when slightly
stretched areas of metal can be encountered.
In using this typeof beater,
small amounts of metal are forced into the spaces
created by the cross milling.
created by the cross milling.
They can also be used on coldaluminium,
but working on sheet steel will be quicker
if heat is applied to the area.
Whenever possible, such beating should
be carried out on the inside of the panel to minimise
resurfacing needed prior to painting.
be carried out on the inside of the panel to minimise
resurfacing needed prior to painting.
Round Face 41mm
Square Face 38mm
Head Width 97mm
Weight 0.425kg